Home Security Fingerprint Door Lock
Sale

Home Security Fingerprint Door Lock

  • Availability: In Stock
$149.99 $82.99
Hurry! only 36 left in stock!
Image

Product Introduction      

This door lock uses a semiconductor living fingerprint sensor with a large amount of fingerprint storage and a resolution of up to 508DPI. Recording fingerprints is fast, accurate, and flexible. The design of the fingerprint + key makes the setting easy. If you often encounter a large change of personnel, you can easily restore the factory settings and re-record the fingerprint.

Let the door open as a pleasure.

智能指纹锁-xq_01

 

       Product Function      

 

360° live fingerprint recognition.

Using a semiconductor living fingerprint sensor, Resolution 508DPI. Support 360-degree fingerprint recognition and living fingerprint recognition. Rejection of fake fingerprints.

Recording fingerprints is fast, accurate and flexible.

 

智能指纹锁-xq_03

 

Fingerprint storage

Fingerprint storage is large, can store 40 fingerprints.

智能指纹锁-xq_04

Just screw on the screw and you can use it

No wiring is required for installation. The circuit board is gathered on the handle. Just screw on the screw and you can use it.

 

智能指纹锁-xq_06

 

Two ways to open doors

The left opening door and the right opening door are combined in two ways of opening the door. Fully meet your needs.

智能指纹锁-xq_07

智能指纹锁-xq_02

 

Emergency key unlock

The mechanical key is an essential accessory for emergency unlocking and equipment management. Please keep it in a safe place.

 

智能指纹锁-xq_09

Easy factory reset

If your factory or your house changes people frequently, don't be afraid. You can easily restore the factory settings with the emergency key.

智能指纹锁-xq_05

The contents of the box(please notice that the battery not included)

6(1)

 Operation       

The e intelligent fingerprint lock is highly integrated, easy to install, easy to maintain, and suitable for any door type.

1. Add fingerprint: rotate the mechanical key clockwise for about 15-20 degrees and press the setting switch, hold it for about 3 seconds, until the blue light lights up and releases it after the sound of "di".Will want to set a finger on the fingerprint center contact, such as successfully collected data, will flash blue light and hear "di" a voice said to record a data, such as no record the good or fails, will flash a red light and heard "drops" to remind the acquisition is invalid, total five successful acquisition, 5 times, after the completion of the blue light long ­ on and hear "di ~ ~ ~" loud sirens, said adding a fingerprint. The blue light flashes throughout the fingerprint entry process, but does not light up in multiple colors at the same time.The touch pressure of the finger requires multiple angles to collect, favorable expansion of the database, the sensitivity of the judgment is helpful!

2. Delete all fingerprints: rotate the mechanical key clockwise for about 15-20 degrees and press the setting switch, hold it for about 5 seconds (the blue light is on first and then beep 1), then release it immediately after the red light is on, the blue light is on and the sound of "di ~" is long, and all fingerprints are deleted.

3. Fingerprint identification to open the door: press the fingerprint, if the fingerprint is correct, the blue light will beep 1, the motor will turn to unlock the door, and the motor will turn automatically 6 seconds later;If the fingerprint is not correct, the red light will beep 2 times.

4. Emergency mechanical key unlocks: insert the mechanical key and rotate counterclockwise about 45 degrees to press the handle to open the door.

5. Installation:

a. the opening diagram is shown in the package opening diagram.

b. clutch adjustment: please adjust the position of the clutch before installation. The adjustment method is shown in the square steel mark: rotate the square steel pin to open on the right when it is flat with the handle, and the pin to open on the left when it is perpendicular with the handle.

c. S200X/S280X/S300X/S330X/S65TX left open right adjustment: Loosen the 3 screws of the limit piece of handle, rotate the handle 180 degrees, and fix it with the screw.S158X/S178X series left open right open adjustment: adjust the screw of the limit piece to the position of the limit lifting handle.

S168X series left open right open adjustment: panel rotation 180 degrees to install.

Please take good care of the mechanical key, the mechanical key is an essential accessory for emergency unlock and setting management!

 

 

Product Introduction      

This door lock uses a semiconductor living fingerprint sensor with a large amount of fingerprint storage and a resolution of up to 508DPI. Recording fingerprints is fast, accurate, and flexible. The design of the fingerprint + key makes the setting easy. If you often encounter a large change of personnel, you can easily restore the factory settings and re-record the fingerprint.

Let the door open as a pleasure.

智能指纹锁-xq_01

 

       Product Function      

 

360° live fingerprint recognition.

Using a semiconductor living fingerprint sensor, Resolution 508DPI. Support 360-degree fingerprint recognition and living fingerprint recognition. Rejection of fake fingerprints.

Recording fingerprints is fast, accurate and flexible.

 

智能指纹锁-xq_03

 

Fingerprint storage

Fingerprint storage is large, can store 40 fingerprints.

智能指纹锁-xq_04

Just screw on the screw and you can use it

No wiring is required for installation. The circuit board is gathered on the handle. Just screw on the screw and you can use it.

 

智能指纹锁-xq_06

 

Two ways to open doors

The left opening door and the right opening door are combined in two ways of opening the door. Fully meet your needs.

智能指纹锁-xq_07

智能指纹锁-xq_02

 

Emergency key unlock

The mechanical key is an essential accessory for emergency unlocking and equipment management. Please keep it in a safe place.

 

智能指纹锁-xq_09

Easy factory reset

If your factory or your house changes people frequently, don't be afraid. You can easily restore the factory settings with the emergency key.

智能指纹锁-xq_05

The contents of the box(please notice that the battery not included)

6(1)

 Operation       

The e intelligent fingerprint lock is highly integrated, easy to install, easy to maintain, and suitable for any door type.

1. Add fingerprint: rotate the mechanical key clockwise for about 15-20 degrees and press the setting switch, hold it for about 3 seconds, until the blue light lights up and releases it after the sound of "di".Will want to set a finger on the fingerprint center contact, such as successfully collected data, will flash blue light and hear "di" a voice said to record a data, such as no record the good or fails, will flash a red light and heard "drops" to remind the acquisition is invalid, total five successful acquisition, 5 times, after the completion of the blue light long ­ on and hear "di ~ ~ ~" loud sirens, said adding a fingerprint. The blue light flashes throughout the fingerprint entry process, but does not light up in multiple colors at the same time.The touch pressure of the finger requires multiple angles to collect, favorable expansion of the database, the sensitivity of the judgment is helpful!

2. Delete all fingerprints: rotate the mechanical key clockwise for about 15-20 degrees and press the setting switch, hold it for about 5 seconds (the blue light is on first and then beep 1), then release it immediately after the red light is on, the blue light is on and the sound of "di ~" is long, and all fingerprints are deleted.

3. Fingerprint identification to open the door: press the fingerprint, if the fingerprint is correct, the blue light will beep 1, the motor will turn to unlock the door, and the motor will turn automatically 6 seconds later;If the fingerprint is not correct, the red light will beep 2 times.

4. Emergency mechanical key unlocks: insert the mechanical key and rotate counterclockwise about 45 degrees to press the handle to open the door.

5. Installation:

a. the opening diagram is shown in the package opening diagram.

b. clutch adjustment: please adjust the position of the clutch before installation. The adjustment method is shown in the square steel mark: rotate the square steel pin to open on the right when it is flat with the handle, and the pin to open on the left when it is perpendicular with the handle.

c. S200X/S280X/S300X/S330X/S65TX left open right adjustment: Loosen the 3 screws of the limit piece of handle, rotate the handle 180 degrees, and fix it with the screw.S158X/S178X series left open right open adjustment: adjust the screw of the limit piece to the position of the limit lifting handle.

S168X series left open right open adjustment: panel rotation 180 degrees to install.

Please take good care of the mechanical key, the mechanical key is an essential accessory for emergency unlock and setting management!

 

 

Select options
In Stock
$435.99 $251.99
Product SKU: 10585-L1-blue
Availability In Stock
Select options
In Stock
$196.99 $108.99
Product SKU: 10586-Add-AU-plug-220V
Availability In Stock
Select options
In Stock
$109.99 $60.99
Product SKU: 10596-XP01
Availability In Stock
Select options
In Stock
$70.99 $37.99
Product SKU: 10550-black-No-Packaging
Availability In Stock
Select options
In Stock
$39.99 $21.99
Product SKU: 10515-15mm-to-26mm-glass
Availability In Stock